­
Ranges & Oven Appliance Parts for Do It Yourself Repair | U-FIX-IT

Ranges & Oven Repair Parts

Safety Note:

Always disconnect power before attempting removal of components. Be aware of sharp edges inside cabinet.  Mark wires and/or take pictures to aid in reassembly. Call U-FIX-IT Appliance Parts for assistance with questions you may have during the diagnosis and repair process.


Bake element put on a fireworks show

Bake element – Occasionally, elements will fail in this manner. Most elements at the end of their life do not go out with this show, but the result is the same. They need to be replaced. U-FIX-IT Appliance Parts keeps most elements in stock. Bring your model number, your old element (remember to remove power to range), or the pieces of your old element to the U-FIX-IT Appliance Parts Store for replacement, or call to confirm your diagnosis.

Electric oven will not get hot

Bake element – Cut off power to range, remove element and take to the U-FIX-IT Appliance Parts store for FREE testing. U-FIX-IT Appliance Parts keeps most elements in stock. Bring your model number if you have it to the U-FIX-IT Store for replacement, or call to confirm your diagnosis.

Gas oven will not get hot

Igniter – The glow bar igniter is located close to the burner. This device ignites the gas when the oven is turned on. The ignitor may still be bad even though it appears to be getting hot. Call the U-FIX-IT Appliance Parts Store for assistance in diagnosis or take the igniter to the store for FREE testing. Cut off power to range before removing igniter and be aware the igniter is brittle and easily broken.

Gas Valve – It is probably not the gas valve. Gas valves do fail, but it is much more likely to be the igniter (95% of the time). Call U-FIX-IT Appliance Parts for free assistance in diagnosis if you suspect your gas valve is bad.

Electric burner (on top of range) will not get hot

Surface burner – Take the surface burner to the U-FIX-IT Appliance Parts Store for FREE testing.

Receptacle – This is the device the the surface burner plugs into. Cut off power to range and take to the U-FIX-IT Appliance Parts Store for free testing.

Infinite switch – This device controls the surface burner. The infinite switch is bad if the surface burner and the receptacle test good. Call the U-FIX-IT Appliance Parts store for free assistance with diagnosis.

Gas burner (on top of range) will not ignite

Igniter Control Module – Call the U-FIX-IT Appliance Parts store for free assistance with diagnosis.

Clock or control is dark (no display)

Electronic Control Board – Call the U-FIX-IT Appliance Parts store for free assistance with diagnosis.

Clock or control has an error code (usually starts with an F)

Call the U-FIX-IT Appliance Parts store for free assistance with diagnosis.

Problems not listed – Call U-FIX-IT Appliance Parts for free assistance as you diagnose the problem and complete the repair.