Dryer Heating Element Replacement
Dryer Heating Element NA 279838 fits Whirlpool, Kenmore/Sears, Estate, Roper, KitchenAid and others.
Model: NA 279838
$59.95 New
Part purpose:
The heating element turns electricity into heat.
Part purpose:
The heating element turns electricity into heat.
Part location on dryer:
Remove the back cover of the dryer. As you face the back of the dryer the heating element will be located in the tube running vertically on the right hand side.
Part failure symptoms:
When the element fails the dryer turns but does not heat.
Part diagnosis:
If there is no continuity through the heating element, it is bad. Visually inspect element for break. Bring your “heating element” in for free confirmation that it is good/bad or call the U-FIX-IT store for free assistance with diagnosis.
Replacing NA 279838 on Whirlpool, Kenmore, Estate, Roper, KitchenAid dryers
What are the symptoms of a failing dryer heating element?
Common symptoms of a failing dryer heating element include the dryer running but not producing heat, clothes taking much longer to dry, and cycles ending with damp laundry. In some cases, the dryer may overheat or shut off prematurely due to safety thermostats reacting to inconsistent heating.
How do I install the dryer heating element 279838?
To install dryer heating element 279838, first disconnect the dryer from power and remove the back or front panel depending on the model. Locate the heating element housing, disconnect wiring carefully, and remove the faulty element. Install the new 279838 element in the same position, reconnect all wires securely, reassemble the dryer, and test for proper heating.
Is the dryer heating element 279838 compatible with my appliance?
The 279838 dryer heating element is compatible with select Whirlpool, Kenmore, Maytag, and other dryers that use this specific part number. Compatibility depends on your exact model number, so it is important to verify it against the manufacturer’s parts diagram or appliance label before purchasing or installing.
What tools are needed for installation?
Basic tools needed for installing a dryer heating element include a screwdriver set, nut driver, needle-nose pliers, and possibly a socket wrench. A multimeter may also be useful for testing continuity and confirming whether the old heating element has failed before replacement.
What causes a dryer heating element to fail?
A dryer heating element can fail due to normal wear and tear, lint buildup restricting airflow, power surges, or overheating caused by blocked vents. Continuous cycling at high temperatures can also weaken the coil over time, eventually causing it to break or stop functioning.
Are there alternatives to part 279838?
es, there are alternative heating elements that may be compatible with certain dryer models, including upgraded OEM versions or equivalent aftermarket parts. However, alternatives must match voltage, wattage, and model compatibility exactly to ensure safe and proper operation.
What safety precautions should I take?
Always unplug the dryer before starting any repair and avoid working on the appliance while it is connected to power. Wear protective gloves, discharge static if needed, and ensure the dryer is completely cooled down. Double-check wiring connections before restoring power to prevent electrical hazards.
Where can I buy part 279838?
Part 279838 can be purchased from appliance parts retailers, online marketplaces, and authorized service centers. It is recommended to buy from reputable suppliers and confirm the exact part number compatibility with your dryer model before purchasing.
What are common installation mistakes?
Common installation mistakes include improper alignment of parts, failing to disconnect power before starting, neglecting to follow manufacturer instructions, and using the wrong tools. These errors can lead to appliance malfunction or safety hazards.
How does the heating element work?
A dryer heating element works by converting electrical energy into heat through a coiled resistance wire. When electricity passes through the coil, it generates heat that warms the air inside the dryer drum, allowing moisture to evaporate from clothing during the drying cycle.
dryer heating element 279838 for whirlpoolkenmore, whirlpool 279838 heating element
Symptoms of a Faulty Heating Element
Understanding the common symptoms of a faulty dryer heating element is crucial for effective troubleshooting. Users may notice that their dryer is not producing heat, taking too long to dry clothes, or the appliance is running but not heating at all.
For example, if clothes come out damp after a full drying cycle, it may indicate an issue with the heating element. Additionally, unusual noises or a burning smell can also signal a malfunction. Recognizing these signs early can help prevent further damage and costly repairs.
How to Diagnose Heating Element Issues
Diagnosing issues with the dryer heating element involves a few simple steps that can be performed at home. First, unplug the dryer and use a multimeter to check for continuity in the heating element. If there is no continuity, it indicates that the heating element is defective and requires replacement.
Moreover, inspecting the thermal fuse and thermostat for any faults is also recommended, as these components can affect the heating element's performance. A thorough diagnosis ensures that users can accurately identify the root cause of their drying problems.
Installation Guide for NA 279838 Heating Element
Installing the NA 279838 heating element is a straightforward process that can be completed with basic tools. Begin by disconnecting the dryer from the power source, then remove the back panel to access the heating element. Carefully disconnect the old element and replace it with the new NA 279838, ensuring all connections are secure.
After installation, reassemble the dryer and plug it back in. It's advisable to run a short cycle to test the new heating element's functionality. Following these steps will help ensure that the dryer operates efficiently and effectively.
Customer Support and Assistance
U-FIX-IT is committed to providing exceptional customer support for all appliance part inquiries. Customers can reach out for assistance in diagnosing issues or for guidance on purchasing the correct replacement parts, including the NA 279838 heating element.
Additionally, the website offers a contact form for direct inquiries, as well as a dedicated phone line for immediate assistance. Our knowledgeable team is ready to help customers navigate their appliance challenges and ensure a satisfactory resolution.
